All Categories

Get in touch

Oil & gas equipment

A drilling rig is one of the first tools we use. A drilling rig is such a big and strong machine, to make hole in the earth to search for oil or gas. It comprises many different parts that work together. These parts are a derrick (a tall structure supporting the drilling equipment), drill casing pipe (connecting for the rig to bit) and block bit itself, this is that sharp part of it cut through Earth. The drill bit is the most important piece because it actually eats into the ground to make a hole

Mud pump is another critical apparatus we use. The mud pump is simply a machine used to send the thick mixture of water and clay (known as mud) into the hole we are drilling. Useful and Necessary Mud This helps prevent the sides of the hole from collapsing. Their failure, during the collapsing of a hole can become very dangerous for these workers as well in case. Therefore, the mud pump is very important to ensure safety during drilling.

Cutting-Edge Machinery for Oil Extraction

Other than these tools, we have very powerful machines that help us get oil out of the ground once we have made a hole. One of them is a pump jack. The pump jack is a machine that lifts oil from underground and brings it up to the surface. It works by moving a series of rods up and down, which help pump the drill oil out of the ground. The pump jack is very effective and is a vital part of the well oil extraction process. Like gas, we use a drilling rig to make a hole to find oil; then, we use the pump jack to extract the oil from deep in the ground. Indeed, for oil, the drilling lid and the pump jack are the perfect team. Additionally, for gas; after we drill the hole, we use the pump jack to help us pump out the gasses from the wells. In our bodies, a buzz between these two machines is essential as it ‘s the best way to get oil at the well. On the contrary, in processing the gas, I have some special and accurate tools that I use. Gas processing is the job of separating natural gas from the other things found in the ground. This is important; for example, we use natural gas to heat our homes, schools, and businesses, and if the gas were not sorted out, we would not use it ideally. For me, one of the tools for gas processing is called a gas chromatograph. This machine is very delicate and helps us separate the difference between the gases. It works by heating the gas, which turns into vapor, and then sending it through a large tube. The tube is called a column, and as the gas moves, different parts of the gas move at different speeds. This allows us to tell them apart and collect them for use

Another essential instrument employed in gas processing is the moisture analyzer. The machine tests the amount of water combined with it in natural gas. We must dry the natural gas very well since if there is too much moisture it can give us problems when we are going to use that gas. If the water content of our gas is too high, it will damage whatever equipment burns that stuff (It's either season 4 or just Amazon) Otherwise known as pipe lines… The moisture analyzer helps us to make sure we are getting a good product.

Why choose BeyondPetro Oil & gas equipment?

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Get in touch