Gate valves Gate valves play a crucial part in the oil and gas industry. They open and close a gate that either restricts or allows the flow of liquids and gases in the valve. This gate is a barrier that can be lifted and lowered to permit or block the fluid from flowing through the valve.
Keep in good condition shall be an important aspect of the use of the gate valve. Regular maintenance can save you from leaks, corrosion or malfunctions that may end up causing costly repairs or replacements. Here are some tips for the maintenance of gate valves.
Manual Gate Valve Repair Problems with Manual Gate Valves The most common types of gate valves can be found for both inside screw design and outside screw design manual gate valves.
Even with good maintenance, manual gate valves can have problems occasionally. Below are several of the most common problems you might encounter with manual gate valves and how to resolve them:
Leaks: If you suspect a leak around the valve, make sure your connections are tight and seals are not damaged, and tighten or replace as necessary.
Obstructed valve gate: If the gate becomes obstructed, preventing it from opening or closing, use some lubricant on the moving parts, add a little gentle knocking to the valve to dislodge the obstruction.
Expert Tips For Safely And Effectively Operating Gate Valves To keep gate valves functioning properly and safely, keep the following tips in mind:
EN
AR
FR
HI
IT
RO
RU
ES
TL
ID
SL
UK
SQ
TR
FA
MS
AZ
KA
MN
KK
UZ
KY
